3DScope-V2

General Details

The volume production interferometer for ferrule end-face geometry measurements at entry-level price.

3D-Scope-v2 is the new interferometer for the use in the production environment. It was designed with speed, precision, simplicity, robustness and cost in mind.

Non-compressed, real time and high quality images are transfered from the hardware to the software via a USB2.0 high speed link in addition to the automation and control commands.
3DScope-v2 has a small footprint and can be interfaced to laptop or desktop computers through one single USB 2.0 link only.
All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

3DScope-v2 is supported by the powerfull BLINK software platform

Product Specs

Spec Sheet
*Repeatability/Reproducibility Range
Radius (mm) ±0.05% / ±0.05% 3 to flat
Apex Offset (µm) ±0.5 / ±1 0 to 500
Fibre Height (nm) ±1 / ±1.5 ±160
Fiber Cleave Angle ±0.01° / ±0.015° 0 to 12°
Measurement Speed 0.5 sec †
Magnification x400
Wavelength 633nm
Power requirements 12V external- 12VA
Temperature 10 to 35°C
Humidity 5 to 95%, non-condensing

* 1 Sigma values.
Repeatability values calculated from 50 consecutive measurements without interaction on connector between measurements.
Reproducibility values calculated from 50 consecutive measurements while rotating connector in ferrule holder between measurements.
† Scan speed, excluding clamping and autofocus

If you’re not ready to order yet and just want to get a quote or ask for informations, click here.

DAISI v2

General Details

The ultimate production interferometer for ferrule end-face geometry measurements.

DAISI v2 (Digital Automated Interferometer for Surface Inspection) was designed with years of industry feedback in mind in order to satisfy the most demanding requirements for the use in the production environment.Non-compressed, real time and high quality images are transfered from the hardware to the software via a USB2.0 high speed link in addition to the automation and control commands. DAISI is portable and can be interfaced to laptop or desktop computers. All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

Software for DAISI was redesigned from ground up with many automation features and a sophisticated interface to the microncontroller-based electronic interface of the system.

Product Specs

Spec Sheet

*Repeatability/Reproducibility Range
Radius (mm) ±0.05% / ±0.05% 3 to flat
Apex Offset (µm) ±0.5 / ±1 0 to 500
Fibre Height (nm) ±1 / ±1.5 ±160 (±15 000 with White-Light option)
Fiber Cleave Angle ±0.01° / ±0.015° 0 to 12°
Measurement Speed 1 sec †
Magnification x300
Wavelength 633nm (White-Light optional)
Power requirements 12V – 25VA
Temperature 10 to 35°C
Humidity 5 to 95%, non-condensing

* 1 Sigma values.
Repeatability values calculated from 50 consecutive measurements without interaction on connector between measurements.
Reproducibility values calculated from 50 consecutive measurements on a PC-polish connector while rotating connector in ferrule holder between measurements.
† Excluding clamping and autofocus

If you’re not ready to order yet and just want to get a quote or ask for informations, click here.

DAISI-MT

General Details

The ultimate production interferometer for Multi-fiber (and Single-fiber) ferrule end-face geometry measurements.

Based on the design and philosophy which made the DAISI a success, here is the brand new DAISI-MT White-Light / Red-Light interferometer, dedicated to the measurement of end-face geometry of multi-fiber ferrules (single-fiber capability).

Its revolutionary design makes it ideal for the use in the production environment as well as field applications.
Non-compressed, real time and high quality images are transferred from the hardware to the software via USB high speed links at speeds up to 100 images per second in addition to the automation and control commands.
DAISI-MT is portable and can be interfaced to laptop or desktop computers.
All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

Software for DAISI-MT was redesigned from ground up with many automation features and a sophisticated interface to the microncontroller-based electronic interface of the system.

Product Specs

Spec Sheet

*Repeatability/Reproducibility Range
X & Y angles (°) 0.002 / 0.02 ±1° deviation from 0°(PC) or 8°(APC)
Fibre Height (µm) 0.003 / 0.01 up to 20
Measurement Speed 6sec. scan + 3sec. reconstruction for a 12 fibers ferrule
AutoFocus speed 10sec.
Field of View configurable 5.6 x 3.0mm max. – Supports 16 fibers/row
Lateral Resolution configurable 2.5µm max.
Wavelength white and red (632nm) LED
Power requirements 12V – 25VA
Temperature 10 to 35°C
Humidity 5 to 95%, non-condensing

* 1 Sigma values based on the measurement of an MT-RJ connector with 2.5µm high fibers and 95% valid pixels.
Repeatability values calculated from 50 consecutive measurements without interaction on connector between measurements.
Reproducibility values calculated from 50 consecutive measurements while removing and inserting connector in ferrule holder between measurements.

Fiberon Technologies is Distributor for DATA-PIXEL in Poland
logo-website-retina

DaisiMT laptop

If you’re not ready to order yet and just want to get a quote or ask for informations, click here.

Our extensive and selective fiber optic portfolio of products coupled with our global presence, technical competency, and the tenacity to work through any possible challenges presented to both small and large scale businesses ensures rapid customer response. For complete product range please visit www.fiberon.com Or Contact us 
Cart