Standard Ribbon Type
Ribbon Type with Fold
Standard Round Type
Round Type with Fold
Single Mode Low Loss
Single Mode
Multi Mode
MPO Mini
MPO loopback Lollipop Style
MPO Standard Loopback

MPO-Elite® Connector Series


  • Ultra low insertion loss
  • High Density Solution
  • UL94 V-0 rated plastic housing and boots
  • Telcordia GR-1435-CORE Compliant
  • RoHS compliant


  • 10G/40G/100G networks
  • Data center
  • Active optical cable
  • Parallel interconnection

MPO-Elite® Connector’s housing are available in many colors such as Green(SingleMode), Beige(MultiMode OM2), Aqua (MultiMode OM3) and Yellow(SingleMode Low Loss). Ferrule available in 4, 8, 12, 24 and 48 fiber hole configuration.
Ferrules are available for SM Standard, SM Low Loss, MM Standard and MM Low Loss. Boots are available for Ribbon bare fiber, Ribbon jacket cable, Round jacket cable.
New special design for slot rear body can make assembly easier.

If you’re not ready to order yet and just want to get a quote or ask for informations, click here.

 MPO-Elite® Spec Sheet

Insertion Loss 0.25dB Typical 0.1dB Typical 0.20dB Typical
Return Loss ≥-60dB (8°Angle Polish) ≥-60dB (8°Angle Polish)  ≥-25dB
Durability ≥-25dB change 500 matings ≥-20dB change 1000 matings
Operating Temperature -40°C to +80°C

Fiberon offers “ELITE” versions of most all Connector and Adapters types featuring the highest performance low-loss ferrules and other premium components. Please ask your Fiberon sales associate for further details.

MPO-Elite®is a registered trademark of Fiberon Technologies, Inc.
  • Specifications may change without notice. Display Product Photos Shown are samples for viewing, not actual products. Colours and styles may vary.

The new MiniMPO

The shortest MPO solution for Bare Ribbon Fibers, it works with all MPO Adapters.
Color available in Green, Yellow, Aqua, Beige.

MPO Adapters


  • Available in multiple flange styles to meet panel design requirements
  • Optional, internal, fully automatic shutter mechanisms on both sides of the adapter to assist in eye safety requirements
  • Shutter requires no manual actuation
  • Accepts industry standard MPO/MTP® interfaces
  • Flange on die-cast version completely covers panel cutout
  • Meet IEC 1754-7 and TIA/EIA FOCIS 5 standards


  • 10G/40G/100G networks
  • Data center
  • Active optical cable
  • Parallel interconnection

MPO adapters are made in both die-cast and industry compliant to insure intermateability with industry standard assemblies and connectors. Available with various flange styles,MPO adapters are able to meet the challenges and mechanical requirements of highly dense system designs while maintaining industry standard footprints.

Housing UL-Rated Plastic or Die Cast
Clip & Shutter Stainless Steel
Durability < 0.3dB change, 500 mating cycles
Operating Temperature -40℃~+70℃
Storage Temperature -40℃~+70℃

An optional innovative feature of MPO adapters is the fully automatic shutter. This internal shutter mechanism, located on both sides of the adapter, requires no manual actuation to receive the benefit of eye safety by simply inserting the MPO connector. The unique stepped design of the shutter prevents the ferrule end-face from making contact with the shutter while mating the connector.

Keyway available for key-Up to key-Up or key Up to key Down

MPO Lego Style Adapters

In the past, data center operators often thought of floor space as the major factor in determining the design of a new data center facility.

Today, data center managers should think about the density of the power, not the amount of floor space they have to work with.
Designing and building a smaller high-density environment requires much less capital than a larger low-density facility and will enable you to operate your data center with significant savings from power consumption and other areas over time, while also improving overall performance.

MPO Lego Adapters are one piece design.
These Adapters offer 45° or 90° solution fitting your needs in your high density environment.
Be free to build your ports number as you need, in both vertical or Horizontal solution.


  • IEC 61754-7 and TIA/EIA 604-5 standards for MPO/MTP interfaces
  • Stack together with multiple rows and columns into a very dense assembly
  • Internal shutter without manual actuation is optional for eye safety
  • Keyway available for key-up to key-up or key up to key down
  • Durability: <0.3dB change, 500 mating cycles
MPO Stackable Adapter angled 45°

MPO Pull/Push Tabs

Further optional choices include our pull tab which allows the MPO-Elite to be removed using a simple tab element  thus, MPO can now be mounted much closer together for extra high density applications.

Fiberon Technologies, Inc.

Headquarter: +1 508 616 9500
California Office: +1 408 262 8500
Europe Branch Office: +48 71 727 7237

Contact Us

Our extensive and selective fiber optic portfolio of products coupled with our global presence, technical competency, and the tenacity to work through any possible challenges presented to both small and large scale businesses ensures rapid customer response. For complete product range please visit Or Contact us